Mounting Kits for load cells
Search filters
CERTIFICATIONS
MOUNTING KITS AND ACCESSORIES FOR LOAD CELLS
Here you will find LAUMAS mounting kits for all types of load cells, along with complementary accessories for their installation (bases, joints, restraints, and feet). Features available: anti-tilt and anti-lateral movement restraints, height adjustment, compensation for non-parallelism of the structure's support surfaces, and EN1090 certification as structural components of systems and machinery.
Use the search filters to find the item that best suits your needs.
for single point load cells AZLI - AZL - AZS - AM
Galvanized steel mounting kit, provided with a self-centring joint foot against lateral forces and anti-tilt.
- Compensation for any misalignments of the support plates of the structure.
- Adjustable height.
- Application range up to 300 kg.
for bending beam load cells FCOL - FCK
Mounting kit made of AISI 304 stainless steel with a compression joint in AISI 304 stainless steel and rubber.
- Compensation for any misalignments of the support plates of the structure.
- Application range up to 300 kg.
for bending beam load cells FCOL - FCK
Mounting kit made of AISI 304 stainless steel, equipped with upper plate with a compression joint in AISI 304 stainless steel and rubber.
- Compensation for any misalignments of the support plates of the structure.
- Application range up to 300 kg.
for bending beam load cells FCOL - FCK
Mounting kits in AISI 304 stainless steel or galvanized steel.
- Self-centring joint foot against lateral forces and anti-tilt.
- Compensation for any misalignments of the support plates of the structure.
- Partial height adjustment.
- Application range up to 300 kg.
for bending beam load cells FCAX - FCAL
Mounting kit with AISI 304 stainless steel lower plate and alloy aluminum tension ball joint.
- Application range up to 500 kg.
for bending beam load cells FCAX - FCAL
Mounting kit made of AISI 304 stainless steel with AISI 304 stainless steel joint + rubber.
- Compensation for any misalignments of the support plates of the structure.
- Application range up to 500 kg.
for bending and shear beam load cells FCAX - FCAL
Mounting kits made of AISI 304 stainless steel provided with upper plate with a compression joint in AISI 304 stainless steel and rubber.
- Compensation for any misalignments of the support plates of the structure.
- Application range up to 1500 kg.
for bending and shear beam load cells FCAX - FCAL
Mounting kits made of AISI 304 stainless steel or galvanized steel.
- Constraint against lateral forces and anti-tilt by self-centring joint foot.
- Compensation for any misalignments of the support plates of the structure.
- Partial height adjustment.
- Application range up to 1500 kg.
for bending and sher beam load cells FCAX - FCAL
AISI 304 stainless steel mounting kits, certified according to EN 1090, which attests its compliance with European quality and safety standards for structural components used in plants and machinery.
- Constraint against lateral forces and anti-tilt by self-centring joint foot.
- Compensation for any misalignments of the support plates of the structure.
- Partial height adjustment.
- Application range up to 1500 kg.
for bending and shear beam load cells FCAL - FCAX - FTK - FTKL - FTP/-P - FTZ
Mounting kits provided with AISI 304 stainless steel upper plate and compression joint in AISI 304 stainless steel and rubber.
- Lower plate and block in galvanized steel.
- Compensation for any misalignments of the support plates of the structure.
- Up to 2000 kg application range.
for shear and bending beam load cells FTKL - FTP/-P - FTK - FTZ
Mounting kits made of AISI 304 stainless steel or galvanized steel, with compression joint in AISI 304 stainless steel and rubber.
- Compensation for any misalignments of the support plates of the structure.
- Application range up to 2000 kg.
for shear and bending beam load cells FTKL - FTP/-P - FTK - FTZ
Mounting kits made of galvanized or stainless steel.
- Constraint against lateral forces and anti-tilt by means of a ball joint with nut in galvanized C40 steel or in stainless steel.
- Compensation for any misalignments of the support plates of the structure.
- Adjustable height.
- Application range up to 2000 kg.
for shear and bending beam load cells FTKL - FTP/-P - FTK - FTZ
Mounting kits made of AISI 304 stainless steel or galvanized steel.
- Constraint against lateral forces and anti-tilt by self-centring joint foot.
- Compensation for any misalignments of the support plates of the structure.
- Adjustable height.
- Application range up to 2000 kg.
for shear and bending beam load cells FTKL - FTP/-P - FTK - FTZ
Mounting kit made of AISI 304 stainless steel, certified according to EN 1090, which attests its compliance with European quality and safety standards for structural components used in plants and machinery.
- Constraint against lateral forces and anti-tilt by self-centring joint foot.
- Compensation for any misalignments of the support plates of the structure.
- Adjustable height.
- Application range up to 2000 kg.
for shear beam load cells FTP - FTK - FTZ
Mounting kits made of AISI 304 stainless steel or galvanized steel.
- Constraint against lateral forces and anti-tilt by self-centring joint foot.
- Compensation for any misalignments of the support plates of the structure.
- Adjustable height.
- Application range up to 5,000 kg.
for shear beam load cells FTP - FTZ
Mounting kit made of AISI 304 stainless steel, certified according to EN 1090, which attests its compliance with European quality and safety standards for structural components used in plants and machinery.
- Constraint against lateral forces and anti-tilt by self-centring joint foot.
- Compensation for any misalignments of the support plates of the structure.
- Adjustable height.
- Application range up to 5,000 kg.
for single point, bending beam, shear beam and compression load cells
Plates for self-centring joint foot, for creating constraints against lateral forces and anti-tilt.
- Made of AISI 304 and galvanized steel.
- Application range up to 5000 kg.
for shear beam load cells FTP - FTK - FTZ
Mounting kits made of galvanized steel.
- Constraint against lateral forces and anti-tilt by a ball joint.
- Compensation for any misalignments of the support plates of the structure.
- Adjustable height.
- Application range up to 10,000 kg.
for compression load cells CLS 1000 - 2000
Mounting kit provided with adjustable upper plate in AISI 304 stainless steel.
- Constraint against lateral forces and anti-tilt by stainless steel self-centring joint foot.
- Compensation for any misalignments of the support plates of the structure.
- Adjustable height.
- Application range up to 2000 kg.
for compression load cells CLS 1000 - 2000
Mounting kit certified according to EN 1090 which attests its compliance with European quality and safety standards for structural components used in plants and machinery.
- Constraint against lateral forces and anti-tilt by a ball joint in AISI 304 stainless steel.
- Compensation for any misalignments of the support plates of the structure.
- Adjustable height.
- Application range up to 2000 kg.
for compression load cell CLS 5000
Mounting kit provided with adjustable upper plate in AISI 304 stainless steel.
- Constraint against lateral forces and anti-tilt by stainless steel self-centring joint foot.
- Compensation for any misalignments of the support plates of the structure.
- Adjustable height.
- Application range up to 5000 kg.
for compression load cell CLS 5000
Mounting kit certified according to EN 1090, which attests its compliance with European quality and safety standards for structural components used in plants and machinery.
- Constraint against lateral forces and anti-tilt by AISI 304 stainless steel self-centring joint foot.
- Compensation for any misalignments of the support plates of the structure.
- Adjustable height.
- Application range up to 5000 kg.
for compression load cell CLS
Mounting kit with adjustable upper plate in hot galvanized steel.
- Constraint against lateral forces and anti-tilt by a ball joint.
- Compensation for any misalignments of the support plates of the structure.
- Adjustable height.
- Application range up to 5000 kg.
Plates for mounting accessories for load cells CBL – CBX – CX 15,000
AISI 304 stainless steel plates to construct mounting accessories for compression load cells in combination with specific bases.
- Up to 15,000 kg application range.
for compression load cells CBL - CBX - CX
Mounting kits made of AISI 304 stainless steel.
- Laminas against lateral forces
- Anti-tilt constraint consisting of two threaded rods with self-locking nut.
- Application range up to 15,000 kg.
for compression load cells CBL – CBX - CX
Mounting kits made of AISI-304 stainless steel, certified according to EN 1090 which attests its compliance with European quality and safety standards for structural components used in plants and machinery.
- Laminas against lateral forces.
- Anti-tilt constraint consisting of two threaded rods with self-locking nut.
- Application range up to 15,000 kg.
for compression load cells CBL - CBX - CX
Mounting kit made of galvanized S355JR construction steel, a cost-effective material which is perfect for use in non-aggressive environments.
- AISI 304 stainless steel laminas against lateral forces
- Anti-tilt constraint consisting of two threaded rods with self-locking nut.
- Application range up to 15,000 kg.
for compression load cells CBL - CBX - CX
Mounting kits made of AISI-304 stainless steel,
- Laminas against lateral forces
- Anti-tilt constraint consisting of two threaded rods with self-locking nut.
- Application range up to 100,000 kg.
for compression load cells CBL - CBX - CX
Mounting kits made of AISI 304 stainless steel, certified according to EN 1090, which attests its compliance with European quality and safety standards for structural components used in plants and machinery.
- Laminas against lateral forces
- Anti-tilt constraint consisting of two threaded rods with self-locking nut.
- Application range up to 100,000 kg.
for compression load cells CBL - CBX - CX
Mounting kits made of galvanized S355JR construction steel, a cost-effective material which is perfect for use in non-aggressive environments.
- AISI 304 stainless steel laminas against lateral forces
- Anti-tilt constraint consisting of two threaded rods with self-locking nut.
- Application range up to 100,000 kg.
for double shear beam load cell DTX
Mounting kit made of nickel-plated steel alloy for rigid attachment of the load cell. It prevents horizontal movement.
- Suitable for high-capacities weighing systems approved for legal use with third parties.
- Application range up to 27,000 kg (60 klb).
for column load cells COL - COK and double shear beam load cell DTL
Mounting kit made of galvanized steel.
- 2 integrated galvanized steel stay rods with a dual ball joint suitable to counter the lateral force.
- Anti-tilt constraint consisting of two threaded rods with self-locking nut.
- Application range up to 50,000 kg.
STAY RODS FOR MOUNTING ACCESSORIES
Galvanized steel turnbuckle with dual ball-and-socket, to be positioned horizontally. Equipped with lock for constraint adjustment.
Suitable for static applications.
Galvanized steel plate for anchoring the turnbuckle.
Bases for mounting accessories for load cells CBL – CBX - CX
For compression load cells.
Bases for mounting accessories for load cells CBL - CBX - CX
For compression load cells.
for load cells FCAL/X - FCOL - FTK/L - FTP/-P - FTZ - FLC
Self-centring joint feet, made of stainless or galvanized steel, for bending beam, shear beam and compression load cells for foot.
- Application range up to 5,000 kg.
for load cells FCAL/X - FCOL - FTK/L - FTP/-P - FTZ - FLC
Ball-mounted self-centring pluggable feet, made of stainless steel.
For shear beam, bending beam and compression for foot load cells.
- Application range up to 10,000 kg.
for load cell FLC 3A
Self-centring adjustable hygienic feet, made of stainless steel, for hygienic compression load cells for foot.
- Application range up to 20,000 kg.
for tension - compression load cells
for load cells CLS - FTK - FTKL - FTP/-P - FTZ
Axial spherical plain steel bearings to compensate for misalignment of the support plates. For compression, bending beam and shear beam load cells.
- Application range up to 10,000 kg.
for load cells FTKL - FTP/-P - FTK - FTZ - CLS
Stainless steel mounting accessory with ball, to compensate for misalignment of the support plates of the structure.
For bending beam, shear beam and compression load cells.
- Application range up to 5,000 kg.
for load cells FTKL - FCAL/X - FTP/-P - FTK/Z/L - CLS - FCOL - FCK
Stainless steel & rubber compression joints to compensate for misalignment of the support plates of the structure.
For shear beam, bending beam and compression load cells.
- Application range up to 2000 kg.