Acessórios de montagem células de carga
Filtros de pesquisa
CERTIFICATIONS
KIT E ACESSÓRIOS DE MONTAGEM PARA CÉLULAS DE CARGA
Aqui você encontrará os kits de montagem LAUMAS para células de carga de todos os tipos, e os acessórios complementares para a sua instalação (bases, articulações, restrições e pés).
Características disponíveis: restrições anticapotamento e contra as forças laterais, ajuste de altura, compensação do não paralelismo dos planos de apoio da estrutura, certificação EN1090 como componentes estruturais de instalações e máquinas.
Utilize os filtros de pesquisa para encontrar o artigo que melhor se ajusta às suas necessidades.
for single point load cells AZLI - AZL - AZS - AM
Max static load 300 kg.
For bending beam load cells FCOL - FCK
Max static load 300 kg.
For bending beam load cells FCOL - FCK
Max static load 300 kg.
for bending beam load cells FCOL - FCK
Mounting kit in AISI 304 stainless steel or galvanized steel, provided with a self-centring joint foot against lateral forces and anti-tilt.
Compensation for any misalignments of the support plates of the structure.
Partial height adjustment.
Up to 300 kg application range.
for load cells FCAX - FCAL
Max static load 500 kg.
for bending beam load cells FCAX - FCAL
Max static load 500 kg.
for load cells FCAX - FCAL
Max static load 500/1500 kg.
for load cells FCAX - FCAL
Max static load 500/1500 kg.
for load cells FCAX - FCAL
Max static load 500/1500 kg.
for bending and shear beam load cells FCAL - FCAX - FTK - FTKL - FTL - FTP/-P - FTZ
Mounting kits provided with AISI 304 stainless steel upper plate and compression joint in AISI 304 stainless steel and rubber.
Lower plate and block in galvanized steel.
Compensation for any misalignments of the support plates of the structure.
Up to 2000 kg application range.
Designed for tanks, hoppers, platforms, etc.
for load cells FTKL - FTP/-P - FTK - FTZ - FTL
Max static load 500/2000 kg.
for load cells FTKL - FTL - FTP/-P - FTK - FTZ
Max static load 2000 kg.
for load cells FTKL - FTP/-P - FTK - FTZ - FTL
Mounting kit provided with AISI 304 stainless steel self-centring joint foot against lateral forces and anti-tilt to compensate for misalignment of the support plates. Lower plate and block in AISI 304 stainless steel. Adjustable height.
Max static load 2000 kg.
for load cells FTKL - FTP/-P - FTK - FTZ - FTL
Max static load 2000 kg.
for load cells FTP - FTZ
Mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with a stainless steel self-centring joint foot, against lateral forces and anti-tilt to compensate for misalignment of the support plates. Adjustable height.
Max static load 5000 kg.
for load cells FTP - FTK - FTZ
Max static load 5000 kg.
for single point, bending beam, shear beam and compression load cells
Plates for constraint against lateral forces and anti-tilt.
Up to 5000 kg application range.
for load cells FTP - FTK - FTZ
Max static load 5000/10,000 kg.
for load cells CLS 1000 - 2000
for load cells CLS 1000 - 2000
for load cells CLS 5000
for load cells CLS 5000
for load cells CLS
Max static load 2000/5000 kg.
Plates to construct accessories for load cells CBL – CBX – CX 15,000
Plates to construct mounting accessories for compression load cells in combination with specific bases.
Up to 15,000 kg application range.
Made of AISI 304 stainless steel.
for compression load cells CBL – CBX - CX
for compression load cells CBL – CBX - CX
for compression load cells CBL – CBX - CX
for compression load cells CBL – CBX - CX
for compression load cells CBL – CBX - CX
Mounting kits made of AISI-304 stainless steel with laminas against lateral forces and anti-tilt constraint consisting of two threaded rods with self-locking nut.
Up to 100,000 kg application range.
Designed for silos, mixing machines, tanks, hoppers subject to vibrations because of parts in motion.
for compression load cells CBL - CBX - CX
for double shear beam load cell DTX
Max static load 60 klb.
for column load cells COL - COK and double shear beam load cell DTL
Max static load 50,000 kg.
STAY RODS FOR MOUNTING ACCESSORIES
Galvanized steel turnbuckle with dual ball-and-socket, to be positioned horizontally.
Equipped with lock for constraint adjustment.
Suitable for static applications.
Galvanized steel plate for anchoring the turnbuckle.
Bolts and pins not included.
Bases for mounting accessories for load cells CBL – CBX - CX
Bases for mounting accessories for load cells CBL - CBX - CX
for load cells FCAL/X - FCOL - FTK/L - FTL - FTP/-P - FTZ - FLC
for load cells FCAL/X - FCOL - FTK/L - FTL - FTP/-P - FTZ - FLC
for tension - compression load cells
for load cells CLS - FTK - FTKL - FTL - FTP/-P - FTZ
for cells FTKL - FTL - FTP/-P - FTK - FTZ - CLS - FTP - CLS
