Webinars & Tutorials

Installation of a weighing system

1. Load Cells installation, capacity, support plates, mounting surfaces, Single Point Load Cells

Description

Capacity and support plates for Shear Beam/Bending Beam/Single Point Load Cells.

Duration: 00:02:32

Date: 18 December 2019

Webinar calendar

Check out the program of upcoming online training courses and Register to the Webinar that suits you best.

Installation of a weighing system

#1
1. Load Cells installation, capacity, support plates, mounting surfaces, Single Point Load Cells
2m 32s
#2
2. Load Cells installation; mechanical constraints; frictions; check for correct installation
1m 38s
#3
3. Load Cells Connected in Parallel; 4 or 6 wire cables; distance from power cable
1m 22s
#4
4. Welding. Recommendations for welding with already installed Load Cells
42s
#5
5. Constraints against horizontal forces and Anti Tilt
1m 50s
#6
6. Silo Weighing/Structures with legs
37s
#7
7. Electrostatic Charges. Grounding of the weighed structure
1m 12s
#8
8. Guidelines for the installation of Weight Indicators and Weight Transmitters
1m 33s
#9
Guidelines for the correct installation of Load Cells, Weight Indicators and Weight Transmitters
9m 30s

Configuration of weighing instruments

#1
Wiring - Multichannel Weight Transmitters
3m 10s
#2
Diagnostics - Multichannel Weight Transmitters
6m 12s
#3
Equalization - Multichannel Weight Transmitters
5m 28s
#4
Calibration - Weight Indicators and Weight Transmitters
5m 43s
#5
Connection of a LCB Universal Digitizer to a Load Cell
6m 05s

Communication with weighing instruments

#1
Integration, via EDS file, of an ETHERNET / IP weight Transmitter into RSLogix 5000
16m 41s
#2
Integration, via generic module, of an ETHERNET / IP weight Transmitter into RSLogix 5000
16m 10s
#3
Integration of an EtherCAT weight Transmitter in Sysmac Studio
12m 24s
#4
Integration of a PROFINET Weight Transmitter in the TiA Portal
20m 31s