INNOVATION IN WEIGHING
SERIAL CONVERTERS
Search filters
CERTIFICATIONS
PROTOCOL CONVERTERS
Industrial serial converters allow communication between devices using different protocols. Specifically, they connect devices with different serial communication standards (RS-232, RS-422, RS-485) and can integrate serial devices into modern networks (such as USB, Modbus RTU, etc.).
Scroll through the items or use the filters to select the most suitable one.
Found 6 products
USB to RS232 CONVERTER
- PC recognizes CONVUSB like an additional serial port.
- Converter compliant with USB specification 1.1.
- D-SUB9 connector.
- Data transfer rate: over 1 Mbit/s
USB to RS485 CONVERTER
- CONVUSB485 connects devices with RS485 terminal board to a USB port.
- Converter compliant with USB 2.0 full speed standard.
- At the ends of the cable there are a type A USB connector and individual stripped and tinned wires for easy connection to a terminal board.
- Data transfer rate: from 300 bit/s to 300 Mbit/s.
- Automatic receive/transmission selection
CONV232485 CONVERTER
- CONV232485 connects up to 32 devices with RS485 interface to RS232 port.
- Equipped with a DB9 female connector for RS232 and a 2-pin removable terminal block for RS485.
- Data transfer rate: 115200 bit/s.
- Automatic receive/transmission selection
RS232 to RS422/485 CONVERTER
- CONVLAU connects a RS485 instrument to a PC or PLC equipped with RS232 serial port.
- RS232 port: max distance 15m
- RS485 port: max distance 1200 m (baud 9600 bit/s).
- Data transfer rate: max 115200 bit/s.
- Back panel mounting on Omega/DIN rail or in waterproof box.
- Power supply 5 - 26 VDC.
- Dimensions: 27 x 93 x h 51 mm.
- Automatic receive/transmission selection
WiFi/SERIAL TRANSCEIVER (RS232 – RS485)
WiFi communication interface device between two serial devices.
- Wall mounting
- Wifi module for wireless connection via Modbus RTU, Laumas ASCII protocol
- RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)
- Connectable to others MODWF devices and W series Laumas weight indicators with OPZW1RADIO optional
PROFIBUS CONVERTER
MPROFI converters allow to connect 1 or 2 LAUMAS instruments in Slave configuration to any PROFIBUS DP master system via RS422/RS485 port.
- RS422/485 port: baud rate max 115200 bit/s. Max distance 1200 m (baud 9600).
- PROFIBUS DP port: baud rate max 12 Mbit/s. Max distance 1200 m (baud 9600).
- Mounting on Omega/DIN rail.
- Power supply 12 - 24 VDC.
- Dimensions : 71 x 90 x h 58 mm.