Webinars & Tutorials

Installation of a weighing system

5. Constraints against horizontal forces and anti tilt

Description

How to realize and place constraints in weighing systems with multiple load cells.

Duration: 00h 01m 50s

Date: 18 December 2019

Webinar calendar

Check out the program of upcoming online training courses and Register to the Webinar that suits you best.

Installation of a weighing system

1. Load cells installation, capacity, support plates, mounting surfaces, single point load cells

2. Load cells installation; mechanical constraints; frictions; check for correct installation

3. Load cells connected in parallel; 4 or 6 wire cables; distance from power cable

4. Welding. Recommendations for welding with already installed load cells

5. Constraints against horizontal forces and anti tilt

6. Silo weighing/structures with legs

7. Electrostatic charges. Grounding of the weighed structure

8. Guidelines for the installation of weight indicators and weight transmitters

Guidelines for the correct installation of load cells, weight indicators and weight transmitters

Configuration of weighing instruments

Wiring - multichannel weight transmitters

Diagnostics - multichannel weight transmitters

Equalization - multichannel weight transmitters

Calibration - weight indicators and weight transmitters

Connection of a LCB universal digitizer to a load cell

Communication with weighing instruments

Integration, via EDS file, of an ETHERNET / IP weight transmitter into RSLogix 5000

Integration, via generic module, of an ETHERNET / IP weight transmitter into RSLogix 5000

Integration of an EtherCAT weight transmitter in sysmac studio

Integration of a PROFINET weight transmitter in the TiA portal