Весовые модули для тензодатчики веса
фильтров поисковых систем
CERTIFICATIONS
КОМПЛЕКТЫ ДЛЯ МОНТАЖА И ДОПОЛНИТЕЛЬНЫЕ ПРИНАДЛЕЖНОСТИ ДЛЯ ТЕНЗОДАТЧИКОВ
Здесь вы найдете монтажные комплекты LAUMAS для всех типов тензодатчиков и дополнительные принадлежности для их установки (основания, шарниры, защитные фиксаторы и опоры).
Доступные характеристики: наличие защитных фиксаторов для предотвращения опрокидывания и бокового смещения, регулировка высоты, компенсация непараллельности опорных поверхностей конструкции, сертификация по стандарту EN1090, подтверждающая пригодность их использования в качестве компонентов конструкций систем и оборудования.
Используйте поисковые фильтры, чтобы найти изделие, в наибольшей степени соответствующее вашим требованиям.
For bending beam load cells FCOL - FCK
Max static load 300 kg.
For bending beam load cells FCOL - FCK
Max static load 300 kg.
for bending beam load cells FCOL - FCK
Mounting kit in AISI 304 stainless steel or galvanized steel, provided with a self-centring joint foot against lateral forces and anti-tilt.
Compensation for any misalignments of the support plates of the structure.
Partial height adjustment.
Up to 300 kg application range.
for bending beam load cells FCAX - FCAL
Max static load 500 kg.
for load cells FCAX - FCAL
Max static load 500/1500 kg.
for load cells FCAX - FCAL
Max static load 500/1500 kg.
for load cells FCAX - FCAL
Max static load 500/1500 kg.
for bending and shear beam load cells FCAL - FCAX - FTK - FTKL - FTL - FTP/-P - FTZ
Mounting kits provided with AISI 304 stainless steel upper plate and compression joint in AISI 304 stainless steel and rubber.
Lower plate and block in galvanized steel.
Compensation for any misalignments of the support plates of the structure.
Up to 2000 kg application range.
Designed for tanks, hoppers, platforms, etc.
for load cells FTKL - FTP/-P - FTK - FTZ - FTL
Max static load 500/2000 kg.
for load cells FTKL - FTL - FTP/-P - FTK - FTZ
Max static load 2000 kg.
for load cells FTKL - FTP/-P - FTK - FTZ - FTL
Mounting kit provided with AISI 304 stainless steel self-centring joint foot against lateral forces and anti-tilt to compensate for misalignment of the support plates. Lower plate and block in AISI 304 stainless steel. Adjustable height.
Max static load 2000 kg.
for load cells FTKL - FTP/-P - FTK - FTZ - FTL
Max static load 2000 kg.
for load cells FTP - FTZ
Mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with a stainless steel self-centring joint foot, against lateral forces and anti-tilt to compensate for misalignment of the support plates. Adjustable height.
Max static load 5000 kg.
for load cells FTP - FTK - FTZ
Max static load 5000 kg.
for single point, bending beam, shear beam and compression load cells
Plates for constraint against lateral forces and anti-tilt.
for load cells CLS 1000 - 2000
for load cells CLS 1000 - 2000
for load cells CLS 5000
for load cells CLS 5000
for load cells CBL - CBX 15000
for compression load cells CBL – CBX - CX
for compression load cells CBL – CBX - CX
for load cells CBL - CBX
for load cells CBL - CBX
BASES TO CONSTRUCT ACCESSORIES FOR CBL - CBX
BASEINF: Turned lower base in AISI 304 stainless steel
BASES TO CONSTRUCT ACCESSORIES FOR CBL - CBX
BINF100-126-165: Turned lower bases in stainless steel
for load cells FCAL/X - FCOL - FTK/L - FTL - FTP/-P - FTZ - FLC
for load cells FCAL/X - FCOL - FTK/L - FTL - FTP/-P - FTZ - FLC
for tension (compression) load cells
for cells FTKL - FTL - FTP/-P - FTK - FTZ - CLS - FTP - CLS
