أدوات التركيب لخلايا الحِمل

Mounting kit made of AISI 304 stainless steel with a compression joint in AISI 304 stainless steel and rubber.
Compensation for any misalignments of the support plates of the structure.
Application range up to 300 kg.

Mounting kit made of AISI 304 stainless steel, equipped with upper plate with a compression joint in AISI 304 stainless steel and rubber.
Compensation for any misalignments of the support plates of the structure.
Application range up to 300 kg.

Designed for small tanks, hoppers, platforms, etc.

Mounting kits in AISI 304 stainless steel or galvanized steel, provided with a self-centring joint foot against lateral forces and anti-tilt.
Compensation for any misalignments of the support plates of the structure.
Partial height adjustment.
Application range up to 300 kg.

Mounting kit made of AISI 304 stainless steel with AISI 304 stainless steel joint + rubber. Compensation for any misalignments of the support plates of the structure.
Application range up to 500 kg.

Mounting kits made of AISI 304 stainless steel provided with upper plate with a compression joint in AISI 304 stainless steel and rubber.
Compensation for any misalignments of the support plates of the structure.
Application range up to 1,500 kg.

Mounting kits made of AISI 304 stainless steel or galvanized steel.
Constraint against lateral forces and anti-tilt by self-centring joint foot.
Compensation for any misalignments of the support plates of the structure.
Partial height adjustment.
Application range up to 1,500 kg.

AISI 304 stainless steel mounting kits, certified according to EN 1090, which attests its compliance with European quality and safety standards for structural components used in plants and machinery.

Constraint against lateral forces and anti-tilt by self-centring joint foot.
Compensation for any misalignments of the support plates of the structure.
Partial height adjustment.
Application range up to 1,500 kg.

Mounting kits provided with AISI 304 stainless steel upper plate and compression joint in AISI 304 stainless steel and rubber.
Lower plate and block in galvanized steel.
Compensation for any misalignments of the support plates of the structure.
Up to 2000 kg application range.

Designed for tanks, hoppers, platforms, etc.

Mounting kits made of AISI 304 stainless steel or galvanized steel, with compression joint in AISI 304 stainless steel and rubber.
Compensation for any misalignments of the support plates of the structure.
Application range up to 2,000 kg.

Designed for tanks, hoppers, platforms, etc.

Mounting kits made of galvanized or stainless steel.
Constraint against lateral forces and anti-tilt by means of a ball joint with nut in galvanized C40 steel or in stainless steel.
Compensation for any misalignments of the support plates of the structure.
Adjustable height.
Application range up to 2,000 kg.

Designed for silos, mixing machines, tanks, hoppers subject to vibrations because of parts in motion. 

Mounting kits made of AISI 304 stainless steel or galvanized steel.
Constraint against lateral forces and anti-tilt by self-centring joint foot.
Compensation for any misalignments of the support plates of the structure.
Adjustable height.
Application range up to 2,000 kg.

Designed for rollers, platforms, tanks, hoppers, etc.

Mounting kit made of AISI 304 stainless steel, certified according to EN 1090, which attests its compliance with European quality and safety standards for structural components used in plants and machinery.

Constraint against lateral forces and anti-tilt by self-centring joint foot.
Compensation for any misalignments of the support plates of the structure.
Adjustable height.
Application range up to 2,000 kg.

Mounting kits made of AISI 304 stainless steel or galvanized steel.
Constraint against lateral forces and anti-tilt by self-centring joint foot.
Compensation for any misalignments of the support plates of the structure.
Adjustable height.
Application range up to 5,000 kg.

Designed for rollers, platforms, tanks, hoppers, etc.

Mounting kit made of AISI 304 stainless steel, certified according to EN 1090, which attests its compliance with European quality and safety standards for structural components used in plants and machinery.

Constraint against lateral forces and anti-tilt by self-centring joint foot.
Compensation for any misalignments of the support plates of the structure.
Adjustable height.
Application range up to 5,000 kg.

Designed for rollers, platforms, tanks, hoppers, ecc.

Plates for self-centring joint foot, for creating constraints against lateral forces and anti-tilt.
Made of AISI 304 and galvanized steel.
Application range up to 5,000 kg.

Mounting kit provided with adjustable upper plate in AISI 304 stainless steel.
Constraint against lateral forces and anti-tilt by stainless steel self-centring joint foot.
Compensation for any misalignments of the support plates of the structure.
Adjustable height.
Application range up to 2,000 kg.

Designed for rollers, platforms, tanks, hoppers, etc.

Mounting kit certified according to EN 1090 which attests its compliance with European quality and safety standards for structural components used in plants and machinery.

Constraint against lateral forces and anti-tilt by a ball joint in AISI 304 stainless steel.
Compensation for any misalignments of the support plates of the structure.
Adjustable height.
Application range up to 2,000 kg.

Designed for rollers, platforms, tanks, hoppers, etc

Mounting kit provided with adjustable upper plate in AISI 304 stainless steel.
Constraint against lateral forces and anti-tilt by stainless steel self-centring joint foot.
Compensation for any misalignments of the support plates of the structure.
Adjustable height.
Application range up to 5,000 kg.

Designed for rollers, platforms, tanks, hoppers, etc.

Mounting kit certified according to EN 1090, which attests its compliance with European quality and safety standards for structural components used in plants and machinery.

Constraint against lateral forces and anti-tilt by AISI 304 stainless steel self-centring joint foot.
Compensation for any misalignments of the support plates of the structure.
Adjustable height.
Application range up to 5,000 kg.

Designed for rollers, platforms, tanks, hoppers, etc. 

AISI 304 stainless steel plates to construct mounting accessories for compression load cells in combination with specific bases.
Up to 15,000 kg application range.

Kit di montaggio realizzati in acciaio inox AISI 304, con lamine contro lo spostamento laterale e vincolo antiribaltamento composto da due barre filettate con dado autobloccante.
Range di applicazione fino a 15.000 kg.

Progettati per la pesatura di sili, serbatoi, miscelatori, tramogge, soggetti a vibrazioni per organi in movimento.

Mounting kits made of AISI-304 stainless steel, certified according to EN 1090 which attests its compliance with European quality and safety standards for structural components used in plants and machinery.

Laminas against lateral forces and anti-tilt constraint consisting of two threaded rods with self-locking nut.

Application range up to 15,000 kg.

Designed for silos, tanks, mixing machines, hoppers subject to vibrations because of parts in motion.

Mounting kits made of AISI-304 stainless steel with laminas against lateral forces and anti-tilt constraint consisting of two threaded rods with self-locking nut.
Application range up to 100,000 kg.

Designed for silos, mixing machines, tanks, hoppers subject to vibrations because of parts in motion.

Mounting kits made of AISI 304 stainless steel, certified according to EN 1090, which attests its compliance with European quality and safety standards for structural components used in plants and machinery.

Laminas against lateral forces and anti-tilt constraint consisting of two threaded rods with self-locking nut.

Application range up to 100,000 kg.

Designed for silos, mixing machines, tanks, hoppers subject to vibrations because of parts in motion.

Self-centring joint feet, made of stainless or galvanized steel, for bending beam, shear beam and compression load cells for foot.
Application range up to 5,000 kg.

Ball-mounted self-centring pluggable feet, made of stainless steel.
For shear beam, bending beam and compression for foot load cells.
Application range up to 10,000 kg.

Self-centring adjustable hygienic feet, made of stainless steel, for hygienic compression load cells for foot.
Application range up to 20,000 kg.

Stainless steel mounting accessory with ball, to compensate for misalignment of the support plates of the structure.
For bending beam, shear beam and compression load cells.
Application range up to 5,000 kg.

Stainless steel & rubber compression joints to compensate for misalignment of the support plates of the structure.
For shear beam, bending beam and compression load cells.
Application range up to 2,000 kg.