INNOVATION IN WEIGHING
أدوات التركيب لخلايا الحِمل
مرشحات البحث
CERTIFICATIONS
أطقم التركيب والملحقات لخلايا التحميل
ستجد هنا أطقم التركيب من LAUMAS لجميع أنواع خلايا التحميل، بالإضافة إلى الملحقات المكملة لتركيبها (القواعد، والمفاصل، وأدوات التثبيت، والأقدام).
من بين أهم الخصائص المتاحة في هذه الأطقم: أنظمة منع الانقلاب ومقاومة الإزاحات الجانبية، وضبط الارتفاع، وتعويض عدم التوازي في أسطح الارتكاز، والحصول على شهادة EN1090 باعتبارها مكونات إنشائية للمنظومات والآلات.
استخدم فلاتر البحث للعثور على المنتج الأنسب لاحتياجاتك.
تم العثور على 42 منتجات
for single point load cells AZLI - AZL - AZS - AM
Galvanized steel mounting kits designed for rollers, platforms, tanks, hoppers, etc..; provided with a self-centring joint foot against lateral forces and anti-tilt to compensate for misalignment of the support plates. Adjustable height.
Max static load 300 kg.
Max static load 300 kg.
for bending beam load cells FCOL - FCK
Mounting kit with a compression joint in AISI 304 stainless steel and rubber, to compensate for misalignment of the support plates of the structure.
Max static load 300 kg.
Max static load 300 kg.
for bending beam load cells FCOL - FCK
Mounting kit designed for small tanks, hoppers, platforms, etc. AISI 304 stainless steel upper plate with a compression joint + rubber, to compensate for misalignment of the support plates of the structure.
Max static load 300 kg.
Max static load 300 kg.
for bending beam load cells FCOL - FCK
Mounting kit in AISI 304 stainless steel or galvanized steel, provided with a self-centring joint foot against lateral forces and anti-tilt.
Compensation for any misalignments of the support plates of the structure.
Partial height adjustment.
Up to 300 kg application range.
for bending beam load cells FCAX - FCAL
Mounting kit provided with alloy aluminum tension ball joint.
Max static load 500 kg.
Max static load 500 kg.
for bending beam load cells FCAX - FCAL
Mounting kit provided with AISI 304 stainless steel joint + rubber, to compensate for misalignment of the support plates.
Max static load 500 kg.
Max static load 500 kg.
for bending and shear beam load cells FCAX - FCAL
Mounting kits provided with upper plate with a compression joint in AISI 304 stainless steel and rubber, to compensate for misalignment of the support plates.
Max static load 500/1500 kg.
Max static load 500/1500 kg.
for bending and shear beam load cells FCAX - FCAL
Mounting kit in AISI 304 stainless steel or galvanized steel, provided with a self-centring joint foot against lateral forces and anti-tilt to compensate for misalignment of the support plates. Partial height adjustment.
Max static load 500/1500 kg.
Max static load 500/1500 kg.
for bending and sher beam load cells FCAX - FCAL
AISI 304 stainless steel mounting kit provided with a AISI 304 stainless steel self-centring joint foot against lateral forces and anti-tilt to compensate for misalignment of the support plates. Partial height adjustment.
Max static load 500/1500 kg.
Max static load 500/1500 kg.
for bending and shear beam load cells FCAL - FCAX - FTK - FTKL - FTL - FTP/-P - FTZ
Mounting kits provided with AISI 304 stainless steel upper plate and compression joint in AISI 304 stainless steel and rubber.
Lower plate and block in galvanized steel.
Compensation for any misalignments of the support plates of the structure.
Up to 2000 kg application range.
Designed for tanks, hoppers, platforms, etc.
for shear and bending beam load cells FTKL - FTP/-P - FTK - FTZ - FTL
Mounting kits constructed of AISI 304 stainless steel or galvanized steel; designed for tanks, hoppers, platforms, etc..; provided with a compression joint in AISI 304 stainless steel and rubber, to compensate for misalignment of the support plates of the structure.
Max static load 500/2000 kg.
Max static load 500/2000 kg.
for shear and bending beam load cells FTKL - FTL - FTP/-P - FTK - FTZ
Hot worked galvanized or in stainless steel mounting kit designed for silos, mixing machines, tanks, hoppers subject to vibrations because of parts in motion. Provided with a ball joint, against lateral forces and anti-tilt to compensate for misalignment of the support plates. Adjustable height.
Max static load 2000 kg.
Max static load 2000 kg.
for shear and bending beam load cells FTKL - FTP/-P - FTK - FTZ - FTL
Mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with a self-centring joint foot, against lateral forces and anti-tilt to compensate for misalignment of the support plates of the structure. Adjustable height.
Max static load 2000 kg.
Max static load 2000 kg.
for shear and bending beam load cells FTKL - FTP/-P - FTK - FTZ - FTL
Mounting kit provided with AISI 304 stainless steel self-centring joint foot against lateral forces and anti-tilt to compensate for misalignment of the support plates. Lower plate and block in AISI 304 stainless steel. Adjustable height.
Max static load 2000 kg.
for shear beam load cells FTP - FTK - FTZ
Mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with a stainless steel self-centring joint foot, against lateral forces and anti-tilt to compensate for misalignment of the support plates. Adjustable height.
Max static load 5000 kg.
Max static load 5000 kg.
for shear beam load cells FTP - FTZ
Mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with a stainless steel self-centring joint foot, against lateral forces and anti-tilt to compensate for misalignment of the support plates. Adjustable height.
Max static load 5000 kg.
for single point, bending beam, shear beam and compression load cells
AISI 304 and galvanized steel plates for foot mounting.
Plates for constraint against lateral forces and anti-tilt.
Up to 5000 kg application range.
Plates for constraint against lateral forces and anti-tilt.
Up to 5000 kg application range.
for shear beam load cells FTP - FTK - FTZ
Galvanized mounting kit designed for silos, mixing machines, tanks, hoppers subject to vibrations because of parts in motion. Provided with a ball joint, against lateral forces and anti-tilt to compensate for misalignment of the support plates. Adjustable height.
Max static load 5000/10,000 kg.
Max static load 5000/10,000 kg.
for compression load cells CLS 1000 - 2000
Mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with adjustable upper plate in AISI 304 stainless steel, constraint against lateral forces and anti-tilt by stainless steel self-centering joint foot, to compensate for misalignment of the support plates of the structure. Adjustable height.
for compression load cells CLS 1000 - 2000
Mounting kit designed for rollers, platforms, tanks, hoppers, etc.; provided with a AISI 304 stainless steel self-centring joint foot, against lateral forces and anti-tilt to compensate for misalignment of the support plates. Adjustable height.
for compression load cell CLS 5000
Mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with adjustable upper plate in AISI 304 stainless steel, constraint against lateral forces and anti-tilt by stainless steel self-centering joint foot, to compensate for misalignment of the support plates of the structure. Adjustable height.
for compression load cell CLS 5000
Mounting kit designed for rollers, platforms, tanks, hoppers, etc.; provided with a AISI 304 stainless steel self-centring joint foot, against lateral forces and anti-tilt to compensate for misalignment of the support plates. Adjustable height.
for compression load cell CLS
Hot worked galvanized mounting kit designed for silos, mixing machines, tanks, hoppers subject to vibrations because of parts in motion. Provided with a ball joint, against lateral forces and anti-tilt to compensate for misalignment of the support plates. Adjustable height.
Max static load 2000/5000 kg.
Max static load 2000/5000 kg.
Plates for mounting accessories for load cells CBL – CBX – CX 15,000
AISI 304 stainless steel plates to construct mounting accessories for compression load cells in combination with specific bases.
Up to 15,000 kg application range.
for compression load cells CBL - CBX - CX
AISI-304 stainless steel mounting kits designed for silos, tanks, mixing machines, hoppers subject to vibrations because of parts in motion. Laminas against lateral forces. Anti-tilt constraint consisting of two threaded rods with self-locking nut.
for compression load cells CBL – CBX - CX
AISI-304 stainless steel mounting kits designed for silos, tanks, mixing machines, hoppers subject to vibrations because of parts in motion. Laminas against lateral forces. Anti-tilt constraint consisting of two threaded rods with self-locking nut.
for compression load cells CBL - CBX - CX
Galvanized S355JR construction steel mounting kits designed for silos, tanks, mixing machines, hoppers subject to vibrations because of parts in motion. AISI 304 stainless steel laminas against lateral forces. Anti-tilt constraint consisting of two threaded rods with self-locking nut.
for compression load cells CBL - CBX - CX
Mounting kits made of AISI-304 stainless steel with laminas against lateral forces and anti-tilt constraint consisting of two threaded rods with self-locking nut.
Up to 100,000 kg application range.
Designed for silos, mixing machines, tanks, hoppers subject to vibrations because of parts in motion.
for compression load cells CBL - CBX - CX
AISI-304 stainless steel mounting kits designed for silos, mixing machines, tanks, hoppers subject to vibrations because of parts in motion. Laminas against lateral forces. Anti-tilt constraint consisting of two threaded rods with self-locking nut.
for compression load cells CBL - CBX - CX
Galvanized S355JR construction steel mounting kits designed for silos, mixing machines, tanks, hoppers subject to vibrations because of parts in motion. AISI 304 stainless steel laminas against lateral forces. Anti-tilt constraint consisting of two threaded rods with self-locking nut.
for double shear beam load cell DTX
Mounting kit constructed of nickel-plated steel alloy; designed for on-board weighing, overhead cranes, silos, mixing machines, tanks, hoppers subject to vibrations Because of parts in motion or wind effect. Suitable for high-capacities weighing systems approved for legal use with third parties.
Max static load 60 klb.
Max static load 60 klb.
for column load cells COL - COK and double shear beam load cell DTL
Galvanized steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts or wind effect. Two integrated galvanized steel stay rods with dual ball-andsocket joints suitable to counter the lateral force. Anti-tilt constraint consisting of two threaded rods with self-locking nut.
Max static load 50,000 kg.
Max static load 50,000 kg.
STAY RODS FOR MOUNTING ACCESSORIES
Galvanized steel turnbuckle with dual ball-and-socket, to be positioned horizontally.
Equipped with lock for constraint adjustment.
Suitable for static applications.
Galvanized steel plate for anchoring the turnbuckle.
Bolts and pins not included.
Bases for mounting accessories for load cells CBL – CBX - CX
Upper and lower turned bases made of AISI 304 stainless steel.
For compression load cells.
For compression load cells.
Bases for mounting accessories for load cells CBL - CBX - CX
Threaded upper base and turned lower bases made of AISI 304 stainless steel.
For compression load cells.
For compression load cells.
for load cells FCAL/X - FCOL - FTK/L - FTL - FTP/-P - FTZ - FLC
Self-centring joint feet.
for load cells FCAL/X - FCOL - FTK/L - FTL - FTP/-P - FTZ - FLC
Ball-mounted self-centering pluggable feet.
for tension - compression load cells
Ball-and-socket joints with nut.
for load cells CLS - FTK - FTKL - FTL - FTP/-P - FTZ
Axial spherical plain steel bearings to compensate for misalignment of the support plates.
for load cells FTKL - FTL - FTP/-P - FTK - FTZ - CLS - FTP
Simple stainless steel accessory with ball, to compensate for misalignment of the support plates of the structure.
for load cells FTKL - FCAL/X - FTP/-P - FTK/Z/L - CLS - FCOL - FCK
Stainless steel & rubber compression joints to compensate for misalignment of the support plates of the structure.