称重传感器称重模块
搜索筛选器
CERTIFICATIONS
称重传感器安装套件及配件
在这里，您可以找到适用于所有类型称重传感器的 LAUMAS安装套件，以及安装所需的配套配件（底座、接头、约束装置和支脚）。
这些套件的主要功能包括：防倾斜和防侧移约束装置、高度调节、结构支撑面不平行度补偿，以及作为系统和机械结构部件的EN1090认证。
使用搜索筛选功能查找最符合您需求的产品。
For bending beam load cells FCOL - FCK
Max static load 300 kg.
For bending beam load cells FCOL - FCK
Max static load 300 kg.
for bending beam load cells FCOL - FCK
Mounting kit in AISI 304 stainless steel or galvanized steel, provided with a self-centring joint foot against lateral forces and anti-tilt.
Compensation for any misalignments of the support plates of the structure.
Partial height adjustment.
Up to 300 kg application range.
for bending beam load cells FCAX - FCAL
Max static load 500 kg.
for load cells FCAX - FCAL
Max static load 500/1500 kg.
for load cells FCAX - FCAL
Max static load 500/1500 kg.
for load cells FCAX - FCAL
Max static load 500/1500 kg.
for bending and shear beam load cells FCAL - FCAX - FTK - FTKL - FTL - FTP/-P - FTZ
Mounting kits provided with AISI 304 stainless steel upper plate and compression joint in AISI 304 stainless steel and rubber.
Lower plate and block in galvanized steel.
Compensation for any misalignments of the support plates of the structure.
Up to 2000 kg application range.
Designed for tanks, hoppers, platforms, etc.
for load cells FTKL - FTP/-P - FTK - FTZ - FTL
Max static load 500/2000 kg.
for load cells FTKL - FTL - FTP/-P - FTK - FTZ
Max static load 2000 kg.
for load cells FTKL - FTP/-P - FTK - FTZ - FTL
Mounting kit provided with AISI 304 stainless steel self-centring joint foot against lateral forces and anti-tilt to compensate for misalignment of the support plates. Lower plate and block in AISI 304 stainless steel. Adjustable height.
Max static load 2000 kg.
for load cells FTKL - FTP/-P - FTK - FTZ - FTL
Max static load 2000 kg.
for load cells FTP - FTZ
Mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with a stainless steel self-centring joint foot, against lateral forces and anti-tilt to compensate for misalignment of the support plates. Adjustable height.
Max static load 5000 kg.
for load cells FTP - FTK - FTZ
Max static load 5000 kg.
for single point, bending beam, shear beam and compression load cells
Plates for constraint against lateral forces and anti-tilt.
Up to 5000 kg application range.
for load cells CLS 1000 - 2000
for load cells CLS 1000 - 2000
for load cells CLS 5000
for load cells CLS 5000
Plates to construct accessories for load cells CBL – CBX – CX 15,000
Plates to construct mounting accessories for compression load cells in combination with specific bases.
Up to 15,000 kg application range.
Made of AISI 304 stainless steel.
for compression load cells CBL – CBX - CX
for compression load cells CBL – CBX - CX
for compression load cells CBL – CBX - CX
for compression load cells CBL – CBX - CX
Mounting kits made of AISI-304 stainless steel with laminas against lateral forces and anti-tilt constraint consisting of two threaded rods with self-locking nut.
Up to 100,000 kg application range.
Designed for silos, mixing machines, tanks, hoppers subject to vibrations because of parts in motion.
Bases for mounting accessories for load cells CBL – CBX - CX
Bases for mounting accessories for load cells CBL - CBX - CX
for load cells FCAL/X - FCOL - FTK/L - FTL - FTP/-P - FTZ - FLC
for load cells FCAL/X - FCOL - FTK/L - FTL - FTP/-P - FTZ - FLC
for tension - compression load cells
for cells FTKL - FTL - FTP/-P - FTK - FTZ - CLS - FTP - CLS
