INNOVATION IN WEIGHING
Преобразователь веса
фильтров поисковых систем
CERTIFICATIONS
Преобразователь веса
Датчики веса LAUMAS располагают всеми наиболее широко распространенными шинами для связи со всеми ПЛК, имеющимися на рынке. Выпускаются как одноканальные, так и многоканальные датчики с встроенным устройством диагностики подсоединенных тензодатчиков. Также доступен широкий выбор типоразмеров, включая компактные решения, обеспечивающие существенную экономию места и соответствующие выгоды.
Пролистайте список или используйте фильтры для выбора изделия, в наибольшей степени соответствующего вашим требованиям.
18 товаров найдено
ANALOG WEIGHT TRANSMITTER
- Current or voltage analog output.
- Compatibile with analog/digital boards normally installed on PLC.
- Calibration with sample weights or load cell simulator.
- Ideal for use with tension/compression load cells.
- PLC via analog output
- up to 4 load cells in parallel by junction box
DIGITAL-ANALOG WEIGHT TRANSMITTER (RS485)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- 16-bit Analog output: 0/4-20 mA; 0-5/10 V; ±5/10 V
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - CANopen)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- CANopen port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - DeviceNet)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- DeviceNet port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - CC-Link)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- CC-Link port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - PROFIBUS)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for back panel
- PROFIBUS DP port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - PROFINET IO)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- 2 PROFINET IO ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - Ethernet/IP)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- 2 EtherNet /IP ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - Modbus/TCP)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- Modbus/TCP port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - Ethernet TCP/IP)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- Ethernet TCP/IP port for remote management (connectable to your PC, smartphone, tablet, etc. via web)
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - EtherCAT)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- 2 EtherCAT ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 – POWERLINK)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- 2 POWERLINK ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - SERCOS III)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- 2 SERCOS III ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
UNIVERSAL LOAD CELLS DIGITIZER
Weight transmitter/digitizer for load cells that transforms an analog load cell (with mV/V output) into a digital load cell and can also be used with existing strain gauge load cells or sensors.
IP67 junction box made of AISI 304 stainless steel or PA66 nylon reinforced with glass fiber. 6 LEDs for communication interface indication. 3 M12 IP67 connectors. Dimensions: 90x40x107 mm including connectors.
- Mounting: wired or integral to the load cell body via standard ¼ GAS fitting
- Suitable for wall mounting
- Micro USB port
- 16-bit analog output: 0/4-20 mA; 0-5/10 V (optional)
- RS485 port (optional)
- Direct connection between RS485 and RS232 without converter
- 2 digital inputs, 3 relay outputs
- Single loading batchings, max 99 formulas
- Optional fieldbuses: PROFINET IO, Ethernet/IP, Ethernet TCP/IP, Modbus TCP, PROFIBUS DP, EtherCAT, POWERLINK, CANopen, CC-Link, CC-Link IE Field Basic, SERCOS III, IO-LINK.
WiFi DIGITAL WEIGHT TRANSMITTER (RS232 - RS485)
- Wall mounting
- Wifi module for wireless connection via integrated web server (for remote management to PC, smartphone, tablet, etc.) or via Modbus RTU/Laumas ASCII protocol.
- RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 4 relay digital outputs
- Connectable to others TLKWF devices and W series Laumas weight indicators with OPZW1RADIO optional
- OIML R76:2006 approved,class III, 3x10000 divisions, 0.6 μV/VS
DIGITAL WEIGHT TRANSMITTER (RS232 - RS485)
- Wall mounting
- RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 4 relay digital outputs
- OIML R76:2006 approved, class III, 3x10000 divisions, 0.6 μV/VSI
INTELLIGENT JUNCTION BOX - 8/16 CHANNELS FOR LOAD CELLS
The CLM8 series offers the benefits and performance of an advanced digital weighing system even using analog load cells.
8/16 independent reading channels for load cells (16 channels by connecting 2 CLM8).
Digital equalization. Automatic diagnostics. Inclinometer function.
Available versions:
8/16 independent reading channels for load cells (16 channels by connecting 2 CLM8).
Digital equalization. Automatic diagnostics. Inclinometer function.
Available versions:
- IP67 stainless steel box: 200x148x45 mm; 8+2 cable glands - plugs.
- IP67 polycarbonate box: 170x140x95 mm; 4/8+2 cable glands – plugs, 4+2 PVC end fittings.
- Omega/DIN rail mounting version: 125x92x52 mm.
- Board only: 151x72x30 mm.
- Ethernet TCP/IP port for remote management (connectable to your PC, smartphone, tablet, etc. via web)
- RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)
- OIML R 76:2006 approved, class III, 3x5000 divis. 0.4μV/VSI