INNOVATION IN WEIGHING
Преобразователь веса
фильтров поисковых систем
CERTIFICATIONS
Преобразователь веса
Датчики веса LAUMAS располагают всеми наиболее широко распространенными шинами для связи со всеми ПЛК, имеющимися на рынке. Выпускаются как одноканальные, так и многоканальные датчики с встроенным устройством диагностики подсоединенных тензодатчиков. Также доступен широкий выбор типоразмеров, включая компактные решения, обеспечивающие существенную экономию места и соответствующие выгоды.
Пролистайте список или используйте фильтры для выбора изделия, в наибольшей степени соответствующего вашим требованиям.
57 товаров найдено
ANALOG WEIGHT TRANSMITTER
- Current or voltage analog output.
- Compatibile with analog/digital boards normally installed on PLC.
- Calibration with sample weights or load cell simulator.
- Ideal for use with tension/compression load cells.
Connections to:
- PLC via analog output
- up to 4 load cells in parallel by junction box
DIGITAL-ANALOG WEIGHT TRANSMITTER (RS485)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- 16-bit Analog output: 0/4-20 mA; 0-5/10 V; ±5/10 V
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - CANopen)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- CANopen port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - DeviceNet)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- DeviceNet port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - CC-Link)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- CC-Link port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - PROFIBUS)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for back panel
- PROFIBUS DP port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - PROFINET IO)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- 2 PROFINET IO ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - Ethernet/IP)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- 2 EtherNet /IP ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - Modbus/TCP)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- Modbus/TCP port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - Ethernet TCP/IP)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- Ethernet TCP/IP port for remote management (connectable to your PC, smartphone, tablet, etc. via web)
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - EtherCAT)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- 2 EtherCAT ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 – POWERLINK)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- 2 POWERLINK ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
DIGITAL WEIGHT TRANSMITTER (RS485 - SERCOS III)
4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Inclinometer function.
- Mounting on Omega/DIN rail for front/back panel
- 2 SERCOS III ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R61, R51 approved - WELMEC Guide 8.8:2017 (MID)
UNIVERSAL LOAD CELLS DIGITIZER
Weight transmitter/digitizer for load cells that transforms an analog load cell (with mV/V output) into a digital load cell and can also be used with existing strain gauge load cells or sensors.
IP67 junction box made of AISI 304 stainless steel or PA66 nylon reinforced with glass fiber. 6 LEDs for communication interface indication. 3 M12 IP67 connectors. Dimensions: 90x40x107 mm including connectors.
- Mounting: wired or integral to the load cell body via standard ¼ GAS fitting
- Suitable for wall mounting
- Micro USB port
- 16-bit analog output: 0/4-20 mA; 0-5/10 V (optional)
- RS485 port (optional)
- Direct connection between RS485 and RS232 without converter
- 2 logic inputs, 3 relay outputs
- Single loading batchings, max 99 formulas
- Optional fieldbuses: PROFINET IO, Ethernet/IP, Ethernet TCP/IP, Modbus TCP, PROFIBUS DP, EtherCAT, POWERLINK, CANopen, CC-Link, CC-Link IE Field Basic, SERCOS III, IO-LINK.
HYGIENIC UNIVERSAL DIGITIZER FOR LOAD CELLS
Weight transmitter - digitizer for load cells that transforms an analog load cell (with mV/V output) into a digital load cell and can also be used with existing strain gauge cells or sensors.
IP67 box made of AISI 304 stainless steel, certified 3-A Sanitary Standards. 6 LEDs to indicate the communication interface. 3 M12 hygienic connectors with solder terminals. Dimensions: 90x40x107 mm including connectors.
- RPSCQC hygienic device authorized by 3-A SSI
- Mounting: wired or integral to the load cell body via standard ¼ GAS fitting
- Micro USB port
- 16-bit analog output: 0/4-20 mA; 0-5/10 V (optional)
- RS485 port (optional)
- Direct connection between RS485 and RS232 without converter
- 2 logic inputs, 3 relay outputs
- Single loading batchings, max 99 formulas
- Optional fieldbuses: PROFINET IO, Ethernet/IP, Ethernet TCP/IP, Modbus TCP, PROFIBUS DP, EtherCAT, POWERLINK, CANopen, CC-Link, CC-Link IE Field Basic, SERCOS III, IO-LINK.
WiFi DIGITAL WEIGHT TRANSMITTER (RS232 - RS485)
- Wall mounting
- Wifi module for wireless connection via integrated web server (for remote management to PC, smartphone, tablet, etc.) or via Modbus RTU/Laumas ASCII protocol.
- RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 4 relay digital outputs
- OIML R76:2006 approved,class III, 3x10000 divisions, 0.6 μV/VSI
- Connectable to others TLKWF devices and W series Laumas weight indicators with OPZW1RADIO optional
DIGITAL WEIGHT TRANSMITTER (RS232 - RS485)
- Wall mounting
- RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)
- 2 digital inputs, 4 relay digital outputs
- OIML R76:2006 approved, class III, 3x10000 divisions, 0.6 μV/VSI
WiFi/SERIAL TRANSCEIVER (RS232 – RS485)
WiFi communication interface device between two serial devices.
- Wall mounting
- Wifi module for wireless connection via Modbus RTU, Laumas ASCII protocol
- RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)
- Connectable to others MODWF devices and W series Laumas weight indicators with OPZW1RADIO optional
DIGITAL-ANALOG WEIGHT TRANSMITTER (RS485)
- Back panel mounting on Omega/DIN rail
- 16-bit Analog output: 0/4-20 mA; 0-5/10 V; ±5/10 V
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
DIGITAL WEIGHT TRANSMITTER (RS485)
- Back panel mounting on Omega/DIN rail
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
DIGITAL WEIGHT TRANSMITTER (RS485 - CANopen)
- Back panel mounting on Omega/DIN rail
- CANopen port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
DIGITAL WEIGHT TRANSMITTER (RS485 - DeviceNet)
- Back panel mounting on Omega/DIN rail
- DeviceNet port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
DIGITAL WEIGHT TRANSMITTER (RS485 - CC-Link)
- Back panel mounting on Omega/DIN rail
- CC-Link port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
DIGITAL WEIGHT TRANSMITTER (RS485 - PROFIBUS)
- Back panel mounting on Omega/DIN rail
- PROFIBUS DP port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
DIGITAL WEIGHT TRANSMITTER (RS485 - PROFINET IO)
- Back panel mounting on Omega/DIN rail
- 2 PROFINET IO ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
DIGITAL WEIGHT TRANSMITTER (RS485 - Ethernet/IP)
- Back panel mounting on Omega/DIN rail
- 2 Ethernet /IP ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
DIGITAL WEIGHT TRANSMITTER (RS485 - Modbus/TCP)
- Back panel mounting on Omega/DIN rail
- Modbus/TCP port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
DIGITAL WEIGHT TRANSMITTER (RS485 - Ethernet TCP/IP)
- Back panel mounting on Omega/DIN rail
- Ethernet TCP/IP port for remote management (connectable to your PC, smartphone, tablet, etc. via web)
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
DIGITAL WEIGHT TRANSMITTER (RS485 - EtherCAT)
- Back panel mounting on Omega/DIN rail
- 2 EtherCAT ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
DIGITAL WEIGHT TRANSMITTER (RS485 – POWERLINK)
- Back panel mounting on Omega/DIN rail
- Two POWERLINK ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
DIGITAL WEIGHT TRANSMITTER (RS485 - SERCOS III)
- Back panel mounting on Omega/DIN rail
- 2 SERCOS III ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- OIML R 61 - WELMEC Guide 8.8:2011 (M.I.D.)
INTELLIGENT JUNCTION BOX - 8/16 CHANNELS FOR LOAD CELLS
The CLM8 series offers the benefits and performance of an advanced digital weighing system even using analog load cells.
8/16 independent reading channels for load cells (16 channels by connecting 2 CLM8).
Digital equalization. Automatic diagnostics. Inclinometer function.
Available versions:
8/16 independent reading channels for load cells (16 channels by connecting 2 CLM8).
Digital equalization. Automatic diagnostics. Inclinometer function.
Available versions:
- IP67 stainless steel box: 200x148x45 mm; 8+2 cable glands - plugs.
- IP67 polycarbonate box: 170x140x95 mm; 4/8+2 cable glands – plugs, 4+2 PVC end fittings.
- Omega/DIN rail mounting version: 125x92x52 mm.
- Board only: 151x72x30 mm.
- Ethernet TCP/IP port for remote management (connectable to your PC, smartphone, tablet, etc. via web)
- RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)
- OIML R 76:2006 approved, class III, 3x5000 divis. 0.4μV/VSI
DIGITAL-ANALOG WEIGHT TRANSMITTER (RS485) 8 CHANNELS FOR LOAD CELLS
The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Inclinometer function.
- 16-bit Analog output: 0/4-20 mA; 0-5/10 V
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs, 5 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- Mounting on Omega/DIN rail for back panel or junction box
- Hygienic version RPSCQC authorized by 3-A SSI
DIGITAL WEIGHT TRANSMITTER (RS485, CANopen) 8 CHANNELS FOR LOAD CELLS
The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Inclinometer function.
- CANopen port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs, 5 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- Mounting on Omega/DIN rail for back panel or junction box
- Hygienic version RPSCQC authorized by 3-A SSI
ANALOG WEIGHT TRANSMITTER (RS485, DeviceNet) 8 CHANNELS FOR LOAD CELLS
The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Inclinometer function.
- DeviceNet port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs, 5 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- Mounting on Omega/DIN rail for back panel or junction box
- Hygienic version RPSCQC authorized by 3-A SSI
DIGITAL WEIGHT TRANSMITTER (RS485, CC-Link) 8 CHANNELS FOR LOAD CELLS
The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Inclinometer function.
- CC-Link port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs, 5 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- Mounting on Omega/DIN rail for back panel or junction box
- Hygienic version RPSCQC authorized by 3-A SSI
DIGITAL WEIGHT TRANSMITTER (RS485, PROFIBUS) 8 CHANNELS FOR LOAD CELLS
The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Inclinometer function.
- PROFIBUS DP port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs, 5 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- Mounting on Omega/DIN rail for back panel or junction box
- Hygienic version RPSCQC authorized by 3-A SSI
DIGITAL WEIGHT TRANSMITTER (RS485, PROFINET IO) 8 CHANNELS FOR LOAD CELLS
The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Inclinometer function.
- 2 PROFINET IO ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs, 5 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- Mounting on Omega/DIN rail for back panel or junction box
- Hygienic version RPSCQC authorized by 3-A SSI
DIGITAL WEIGHT TRANSMITTER (RS485, Ethernet/IP) 8 CHANNELS FOR LOAD CELLS
The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Inclinometer function.
- Ethernet /IP port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs, 5 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- Mounting on Omega/DIN rail for back panel or junction box
- Hygienic version RPSCQC authorized by 3-A SSI
DIGITAL WEIGHT TRANSMITTER (RS485, Modbus/TCP) 8 CHANNELS FOR LOAD CELLS
The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Inclinometer function.
- Modbus/TCP port
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs, 5 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- Mounting on Omega/DIN rail for back panel or junction box
- Hygienic version RPSCQC authorized by 3-A SSI
DIGITAL WEIGHT TRANSMITTER (RS485, EtherCAT) 8 CHANNELS FOR LOAD CELLS
The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Inclinometer function.
- Two EtherCAT ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs, 5 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- Mounting on Omega/DIN rail for back panel or junction box
- Hygienic version RPSCQC authorized by 3-A SSI
DIGITAL WEIGHT TRANSMITTER (RS485, Ethernet TCP/IP) 8 CHANNELS FOR LOAD CELLS
The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Inclinometer function.
- Ethernet TCP/IP port for remote management (connectable to your PC, smartphone, tablet, etc. via web)
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs, 5 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- Mounting on Omega/DIN rail for back panel or junction box
- Hygienic version RPSCQC authorized by 3-A SSI
DIGITAL WEIGHT TRANSMITTER (RS485, POWERLINK) 8 CHANNELS FOR LOAD CELLS
The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Inclinometer function.
- Two POWERLINK ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs, 5 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- Mounting on Omega/DIN rail for back panel or junction box
- Hygienic version RPSCQC authorized by 3-A SSI
DIGITAL WEIGHT TRANSMITTER (RS485, SERCOS III) 8 CHANNELS FOR LOAD CELLS
The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Inclinometer function.
- Two SERCOS III ports
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs, 5 relay outputs
- OIML R 76:2006 approved, class III, 10,000 divis. 0.2μV/VSI
- Mounting on Omega/DIN rail for back panel or junction box
- Hygienic version RPSCQC authorized by 3-A SSI
STAINLESS STEEL BOX FOR TLM8 WEIGHT TRANSMITTER
- IP68 protection rating (on request IP69K)
- Wall, panel and desk mounting
- ATEX version (zone 2-22)
- TEST key for direct access to the diagnostic functions
HYGIENIC STAINLESS STEEL BOX FOR TLM8 WEIGHT TRANSMITTER
- Hygienic device RPSCQC authorized by 3-A SSI
- IP69K protection rating
- Panel mounting
- TEST key for direct access to the diagnostic functions
ANALOG WEIGHT TRANSMITTER (RS485)
- Simple zero setting and full scale through digital rotary control (encoder).
- Display mV displaying, load cells and analog output value (V or mA).
- Theoretical calibration or real calibration with sample weights.
- 16-bit Analog output: 0/4-20 mA; 0-5/10 V; ±5/10 V
- RS485 port (Modbus RTU)
- Mounting on Omega/DIN rail for back panel or junction box
- Box versions: IP67 and IP67 ATEX (zone 2-22)
DIGITAL WEIGHT TRANSMITTER (RS485)
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 2 optorelays logic outputs
- Mounting on Omega/DIN rail for back panel or junction box
- Box versions: IP67 and IP67 ATEX (zone 2-22)
DIGITAL-ANALOG WEIGHT TRANSMITTER (RS485)
- 16-bit Analog output: 0/4-20 mA; 0-5/10 V; ±5/10 V
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 2 optorelays logic outputs
- Mounting on Omega/DIN rail for back panel or junction box
- Box versions: IP67 and IP67 ATEX (zone 2-22)
WEB SERVER MASTER FOR W WEIGHT INDICATORS AND TLB WEIGHT TRANSMITTERSSERIES (max 8)
Ideal for supervision, management and remote control of the W series weight indicators and TLB series weight transmitters (max 8 instruments).
WEBLAU makes remote assistance easier, as it allows to control the status of weighing instrumentation connected to the RS485 network from anywhere, and to quickly detect any possible anomaly. It therefore represents a valuable aid for dealers and installers of LAUMAS weighing instruments.
- RS485 port (Modbus RTU)
- Ethernet TCP/IP port for remote management via internet from PC, smartphone or tablet, etc.
- Back panel mounting on Omega/DIN rail
WEBLAU makes remote assistance easier, as it allows to control the status of weighing instrumentation connected to the RS485 network from anywhere, and to quickly detect any possible anomaly. It therefore represents a valuable aid for dealers and installers of LAUMAS weighing instruments.
DIGITAL-ANALOG LOAD LIMITING DEVICE/WEIGHT TRANSMITTER
- 16-bit Analog output: 0/4-20 mA; 0-5/10 V; ±5/10 V (optional)
- RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 4 relay outputs
- Mounting on Omega/DIN rail for back panel or junction box
- Box versions: IP67 and IP67 ATEX (zone 2-22)
DIGITAL WEIGHT TRANSMITTER (RS232 - RS485)
- Synchronous weight transmission for PLCs without serial port
- 16-bit Analog output: 0/4-20 mA; 0-5/10 V; ±5/10 V (optional)
- RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 4 relay outputs
- Mounting on Omega/DIN rail for back panel or junction box
- Box versions: IP67 and IP67 ATEX (zone 2-22)
IP67 CASE WITH TRANSPARENT COVER
For weight transmitter TLE.
- ATEX approved (zone 2-22)
- 6 M16x1.5 cable glands
- Dimensions 170x140x95 mm; centre distance 122x152 mm
DIGITAL LOAD LIMITING DEVICE
Suitable for lifting systems.
Single/multi-weighing system: load limitation (single and sum) for systems with up to 4 weighing points, by connecting multiple units.
Single/multi-weighing system: load limitation (single and sum) for systems with up to 4 weighing points, by connecting multiple units.
- RS232 and RS485 ports
- 2 digital inputs
- 3 relay outputs
- Mounting on Omega/DIN rail for back panel or junction box
- Power Supply 24-48 Vdc/Vac
- Load cells connections continuous check
DIGITAL LOAD LIMITING DEVICE
Suitable for lifting systems.
Dual channel input system for single or double bridge load cells, in accordance with category 2 as per EN 13849-1:2008, PL d (corresponding to SIL 2, EN62061 standard).
Dual channel input system for single or double bridge load cells, in accordance with category 2 as per EN 13849-1:2008, PL d (corresponding to SIL 2, EN62061 standard).
- RS232 and RS485 ports
- 2 digital inputs
- 4 relay outputs
- 2 independent load cell inputs
- Mounting on Omega/DIN rail for back panel or junction box
- Power Supply 24-48 Vdc/Vac
- Load cells connections continuous check