TLM8 SERCOS III

DIGITAL WEIGHT TRANSMITTER (RS485, SERCOS III) 8 CHANNELS FOR LOAD CELLS

Весоизмерительные приборы

Преобразователь веса

TLM8 SERCOS III

ЗАПРОС ЦИТАТЫ ПОПРОСИТЕ ИНФОРМАЦИЮ ДОБАВИТЬ В ИЗБРАННОЕ

GENERAL FEATURES

Weight transmitter with backlit graphic LCD display, 60x32 mm, 128x64 pixels. Four-key keypad for the system calibration. TEST key for direct access to the diagnostic functions. Dimensions: 148 x 92 x 60 mm.

The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics.

Two SERCOS III ports
RS485 port (Modbus RTU/Laumas ASCII protocol)
3 logic inputs, 5 relay outputs
OIML R76:2006 approved, class III, 10000 divis. 0.2μV/VSI
Mounting on Omega/DIN rail for back panel or junction box
Hygienic version RPSCQC authorized by 3-A SSI
8 channels A/D converter - 24bit (16000000 points) 4.8 kHz
Display range 999999

DOWNLOAD

Check which documents are available in other languages.

Руководства и листы продуктов

Produktblatt

(696 KB)

EU-Baumusterprüfbescheinigung (NAWI)

ВОЙТИ

TLM8 SERCOS III Anleitung

ВОЙТИ

TLM8 Protokolle - Anleitung

ВОЙТИ

Прейскуранты

Produktblatt mit Preisen

ВОЙТИ

Сертификаты

INMETRO-Zertifizierung - Brasilien

ВОЙТИ

UL/CSA Konformitätsbescheinigung - Vereinigte Staaten und Kanada

ВОЙТИ

TR CU 020 (EAC) Deklaration - Eurasische Zollunion

ВОЙТИ

OIML R 76 Zertifikat (NAWI)

ВОЙТИ

ПО и файлы конфигурации

SDDML - Device Configuration File

ВОЙТИ

Технические чертежи

TLM8 SERCOS III - 3D Modell

ВОЙТИ

CASTLG - 3D Modell

ВОЙТИ

CASTLG8PG9 - 3D Modell

ВОЙТИ

CASTLG8GUA - 3D Modell

ВОЙТИ

CASTLGTAST - 3D Modell

ВОЙТИ

CASTLGTAST8PG9 - 3D Modell

ВОЙТИ

CASTLGTAST8GUA - 3D Modell

ВОЙТИ

CASTLM8I - 3D Modell

ВОЙТИ

CASTLM8I3A - 3D Modell

ВОЙТИ

Соответствующие коды артикула

JOLLYTLM8SERCOS, JOLLYTLM8SERCOSD, OEMTLM8SERCOS, TLM8SERCOS, TLM8SERCOSD

Примечания к выпуску продукта

1.11.00 - 23/06/2025

Added

analog output: setting of current/voltage value corresponding to an alarm condition detected by the instrument

Changed

Load batching program: batched formula not shown on the displayed during the procedure
Inclinometer function: improved the performances of the compensation algorithm

Fixed

Digital equalization: wrong reading of the coefficients by remote
Digital equalization: wrong setting of equalization mode by remote
Load batching program: setting of MODAFAL parameter to values greater than 9 not possible
Inclinometer function: unwanted enabling of the function when accessing to the menu

смотреть все