شهادة اعتماد مطابقة مواصفات الاتحاد الجمركي الأوروبي الآسيوي EACعلامة المطابقة الأوروبية (CE)شهادة UKCA (تقييم المطابقة في المملكة المتحدة) للمملكة المتحدة
أدوات إلكترونية للوزن الصناعي
محول رقمي خلايا الحِمل

LCB

اطلب اقتباس طلب المعلومات إضافة إلى المفضلة

‫GENERAL FEATURES

Digitizer/Weight Trasmitter for load cells conceived with an eye on IoT (Internet of Things). Three IP67 M12 connectors. Six indicator led of the communication interface. Dimensions: 90x40x107 mm including connectors.
IP67 junction box made of AISI 304 stainless steel or PA66 nylon reinforced with glass fiber.

CB Digitizer transforms an analog load cell (output mV/V) into digital and can also be used on existing load cells or strain gauge sensors. Designed for an assembly/wiring integral with the load cell body, it can be connected by fieldbus to PLCs of the most important international brands. The weight calculation frequency reaches up to 500 values a second and also the update frequency of the data on the fieldbus can reach the maximum speed of 500 updates a second, when using the PROFINET, EtherNet/IP and EtherCAT buses.
  • Optional fieldbuses: PROFINET IO, Ethernet/IP, Ethernet TCP/IP, Modbus TCP, PROFIBUS DP, EtherCAT, POWERLINK, CANopen, CC-Link, CC-Link IE Field Basic, SERCOS III, IO-LINK.
  • Micro USB port
  • 16-bit Analog output: 0/4-20 mA; 0-5/10 V (optional)
  • RS485 port (optional)
  • Direct connection between RS485 and RS232 without converter.
  • 2 logic inputs, 3 relay outputs
  • Single loading batchings, max 99 formulas
  • Mounting: wired or integral to the load cell body via standard ¼ GAS fitting
  • Suitable for wall mounting

The instrument can be configured and managed using the free Instrument Manager PC software, included in the supply.

‫DOWNLOAD

‫Check which documents are available in other languages.
كتيبات وأوراق المنتج
(336 KB)
LCB - Installation instructions LCB - Installation instructions
LCB manual LCB manual
كاتالوج قائمة الأسعار
Data sheet with prices Data sheet with prices
برنامج وملف التهيئة
XML - Device Configuration File - ETHERCAT XML - Device Configuration File - ETHERCAT
XDD - Device Configuration File - POWERLINK XDD - Device Configuration File - POWERLINK
EDS - Device Configuration File - ETHERNET/IP EDS - Device Configuration File - ETHERNET/IP
GSDML - Device Configuration File - PROFINET IO GSDML - Device Configuration File - PROFINET IO
SDDML - Device Configuration File - SERCOS III SDDML - Device Configuration File - SERCOS III
EDS - Device Configuration File - CANOPEN EDS - Device Configuration File - CANOPEN
XML - Device Configuration File - IO-Link XML - Device Configuration File - IO-Link
رسومات CAD
LCB stainless steel - 3D model LCB stainless steel - 3D model
LCB nylon - 3D model LCB nylon - 3D model
رموز العناصر ذات الصلة
LCBCANOPEN, LCBETHEIP, LCBETHERCAT, LCBETHETCP, LCBIOLINK, LCBMODBUSTCP, LCBP-CANOPEN, LCBP-CCLINKIE, LCBP-ETHEIP, LCBP-ETHERCAT, LCBP-IOLINK, LCBP-MODBUSTCP, LCBP-POWERLINK, LCBP-PROFINETIO, LCBP-RS485ANA, LCBP-SERCOSIII, LCBPOWERLINK, LCBPROFINETIO, LCBRS485ANA, LCBSERCOSIII
ملاحظات تحرير المنتج

1.04.02 - 14/11/2023

Added

  • Added Instrument Manager support
  • Added weighing filters
  • Added calibration via characterization values of the load cell
  • Added real calibration points, it is now possible to linearize up to 8 points
  • Added CCLINKIE fieldbus

Modified

  • Improved weighing elaboration rate up to 500 weights per second
  • Improved fieldbus transmission rate up to 500 weights per second (fieldbus dependant)
  • Modified instrument status address
  • Updated command register commands feedback 

Removed

  • Removed LCB Manager support

Note

  • It is not possible to update the firmware from versions prior to 1.04.00

هل ترى كل

منتجات ذات صلة